BDVFP - N-1051 MMM-A-1617 TYPE 2
- MSDS: BDVFP
- Manufacturer: SIDMAK LABORATORIES INC
- Product Name: N-1051 MMM-A-1617 TYPE 2
- National Stock Number: 8040-00-290-4301
Product Identification
Product ID:N-1051 MMM-A-1617 TYPE 2
MSDS Date:01/01/1987
FSC:8040
NIIN:00-290-4301
MSDS Number: BDVFP
Responsible Party
EAST HANOVER, NJ 07936-2822
US
Emergency Phone: 201-386-5566
Info Phone: 201-386-0547
Cage: 1BL76
Contractor
Telephone: 201-386-5566
Cage: 1BL76
Ingredients
METALLIC OXIDES
Fraction By Weight: 1%
NEOPRENE RUBBER
RTECS: EI9660000
Fraction By Weight: 8%
KETONES
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL 200 PPM; Z-2
ACGIH TLV: S, 50 PPM; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
HEXANE (N-HEXANE)
CAS: 110-54-3
RTECS: MN9275000
OSHA PEL 500 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:NARCOSSIS AND/OR POSSIBLE HEADACHE OR BRONCHIAL
CATARRH
First Aid
First Aid:FRESH AIR OR OXYGEN.DO NOT INDUCE VOMITING.OBTAIN MEDICAL
ATTENTION.
Fire Fighting
Flash Point:<20F <-7C
Lower Limits:1.2
Upper Limits:13
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL,TRICHLORETHANE
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS.
Accidental Release
Spill Release Procedures:ABSORB SPILL IN SAND,EARTH,VERMICULITE,
OIL-DRI SHOVEL ABSORBED MIXTURE INTO STEEL CONTAINER AND COVER.
Handling
Handling and Storage Precautions:STORE IN APPROVED SOLVENT STORAGE
AREA.
Exposure Controls
Ventilation:LOCAL EXHAUST REMOVE VAPORS DURING PROCESSING.
Eye Protection:SAFETY GLASSES.
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:152F 66C
Vapor Pres:64
Vapor Density:0.8
Spec Gravity:0.85
Evaporation Rate & Reference:BUAC=1) 6.87
Appearance and Odor:OFF WHITE
Percent Volatiles by Volume:87
Stability
Stability Indicator/Materials to Avoid:YES
OXIDES OF ZINC,MAG.,CHLORINE,PHENOL, CARBON MONOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE TO LOCAL,STATE AND FEDERAL
SOLVENT WASTE DISPOSAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.